Experts in 3D technologies since 2012

Industrial vacuum cleaner DELFIN MTL 451 INERT 1/2D

408 300 ₴
Price with VAT
Free Training
In Stock
00-00013603
Reviews: (0)
408 300 ₴
Power Requirements 115 / 230 V, 50 / 60 Hz
Running Noise, dB 74
Suction Power (kPa) 22,5
Net Weight (kg) 52
Dimensions Assembled (mm) 580 × 700 × 1470
(see all)

Industrial vacuum cleaner DELFIN MTL 451 INERT 1/2D

DELFIN MTL 451 INERT: industrial vacuum cleaner with an inerting system

DELFIN MTL 451 INERT 1/2D is a single-phase industrial vacuum cleaner for collecting reactive dust and solid particles using a liquid inerting system. The model is ATEX-certified for internal zone 20 and external zone 21. A 1.1 kW brushless motor, an M-class antistatic filter and an additional HEPA filter allow the equipment to be used in facilities with heightened explosion-protection requirements.

Key advantages of the DELFIN MTL 451 INERT 1/2D vacuum cleaner

  • ATEX certification. Category 1/2D equipment is designed to operate in internal zone 20 and external zone 21 in accordance with the established explosion-protection marking.
  • Neutralisation of reactive dust. The liquid inerting system brings the collected particles into contact with a special liquid. The effectiveness of the system has been tested to standard EN 17348.
  • High-performance brushless motor. The 1.1 kW electric drive generates a maximum vacuum of 2250 mm H₂O and provides an air flow of up to 215 m³/h.
  • M-class antistatic filter. The ANT M polyester filter element with an area of 20 000 cm² traps dust when cleaning industrial premises.
  • Additional air purification. The built-in HEPA filter with an area of 11 000 cm² traps fine particles that pass through the main filter.
  • Dust-tight suction head. The Ex tb design has seals with an IP64 degree of protection.
  • Convenient filter cleaning. The manual mechanism allows accumulated dust to be removed from the filter surface, while the clogging indicator helps to monitor its condition.
  • Mobile design. The body on a wheeled platform makes it easier to move the vacuum cleaner between work areas.

Liquid inerting for dust collection

The DELFIN MTL 451 INERT industrial vacuum cleaner is equipped with a liquid inerting system designed to neutralise reactive particles. This technology reduces the risks associated with collecting dust that may enter into dangerous reactions on contact with air or other substances. After being drawn in, the particles enter the separator and come into contact with the inerting liquid. This limits their interaction with air and reduces the risk of a hazardous dust mixture forming. The tank is designed for 10 l of inerting liquid. The total capacity of the liquid together with the collected material is 15 l. The effectiveness of the neutralisation system has been tested in accordance with EN 17348, which sets out requirements for equipment used to collect combustible dust. The choice of inerting liquid, the verification of its compatibility with a specific powder and the procedure for waste disposal must be carried out in accordance with the manufacturer's technical recommendations and the properties of the material.

ATEX compliance and protection when working with combustible dust

The DELFIN MTL 451 INERT 1/2D is designed for use in production areas where there is a risk of an explosive dust atmosphere forming. Category 1/2D provides for the operation of the equipment in two zones:

  • Zone 20, internal. The space inside the vacuum cleaner, where an explosive concentration of dust may be present continuously, for long periods or frequently.
  • Zone 21, external. A production area in which an explosive dust atmosphere may occasionally form during normal technological operation.

The marking II 1/2D Ex h tb IIIC T80°C Int / T95°C Ext Da/Db defines the equipment category, dust group, temperature limits and levels of explosion protection. The suction head is made using Ex tb technology and has an IP64 degree of protection. Compatible ATEX accessories and tested non-metallic elements are provided for operation.

Dust filtration in the DELFIN MTL 451 INERT

The air purification system consists of a main antistatic filter and an additional HEPA filter. This design makes it possible to trap dust of various particle sizes during industrial cleaning.

ANT M antistatic polyester filter

The main filter is star-shaped, with an area of 20 000 cm² and a diameter of 500 mm. The antistatic polyester reduces the build-up of electrostatic charge on the filter surface. The ANT M class complies with the IEC 60335-2-69 classification. A built-in manual cleaning mechanism is provided for removing dust, which does not require the filter to be dismantled. The clogging indicator makes it possible to determine in good time when cleaning is needed.

HEPA filter for additional purification

The DELFIN MTL 451 INERT is supplied with a HEPA filter with a filter surface area of 11 000 cm². It provides additional retention of fine dust after the air has passed through the main filter element.

Applications of the DELFIN MTL 451 INERT

The vacuum cleaner is designed for collecting dust and solid particles at industrial facilities where special explosion-protection requirements must be observed. The equipment can be used in the following industries:

  • Metal 3D printing. Cleaning up residual metal powders in additive manufacturing areas after confirming the compatibility of the material with the inerting system.
  • Metalworking industry. Removal of reactive metal dust from machine surfaces, equipment and workplaces.
  • Powder metallurgy. Cleaning of areas used for the preparation, processing and handling of metal powders.
  • Chemical production. Collection of reactive powdery substances, provided they are compatible with the design of the vacuum cleaner.
  • Production of special alloys. Cleaning of process areas where combustible or reactive metal particles accumulate.

Before using the vacuum cleaner, it is necessary to check the chemical properties of the powder, its explosivity and its compatibility with the inerting liquid.

Main assemblies and components of the DELFIN MTL 451 INERT

The design of the vacuum cleaner includes elements for suction, air purification and neutralisation of reactive dust. When operating in explosive zones, accessories with the appropriate ATEX approval must be used.

  1. Brushless electric motor. A single-phase drive with a rated power of 1.1 kW.
  2. Ex tb suction head. A dust-tight assembly with an IP64 rating.
  3. ANT M filter. The main antistatic polyester element.
  4. HEPA filter. An additional element for trapping fine particles.
  5. Liquid separator. An inerting system for neutralising reactive dust.
  6. AISI 304 container. A stainless steel tank for the collected material.
  7. Filter cleaning mechanism. A manual system for removing dust from the filter surface.
  8. Clogging indicator. A device for monitoring the condition of the main filter.
  9. Wheeled base. A platform for moving the vacuum cleaner.

Technical specifications of the DELFIN MTL 451 INERT 1/2D

General technical parameters

Parameter Value
Equipment typeSingle-phase industrial vacuum cleaner
PurposeCollection of dust and solid particles
CertificationATEX
Operating zones20 internal / 21 external
Explosion-protection category1/2D
MarkingII 1/2D Ex h tb IIIC T80°C Int / T95°C Ext Da/Db
Motor typeSingle-phase brushless
Rated power1.1 kW
Supply voltage230 V
Alternative voltage available115 V
Mains frequency50/60 Hz
Current consumption8 A
Maximum air flow215 m³/h
Maximum vacuum2250 mm H₂O
Suction inlet diameter50 mm
Noise level74 dBA
Net dimensions580 × 700 × 1470 mm
Net weight52 kg

Inerting system parameters

Parameter Value
System typeLiquid inerting
PurposeNeutralisation of reactive dust
Volume of inerting liquid10 l
Liquid capacity including collected material15 l
Test standardEN 17348
Container materialAISI 304 stainless steel

Filtration technical specifications

Parameter Value
Main filter designStar-shaped
Main filter materialPolyester
Filtration classANT M
Classification standardIEC 60335-2-69
Main filter area20 000 cm²
Main filter diameter500 mm
Specific filter load120 m³/m²/h
Cleaning methodManual
Clogging indicatorYes
Additional HEPA filterInstalled
HEPA filter area11 000 cm²

Order the DELFIN MTL 451 INERT 1/2D industrial vacuum cleaner

Buy the DELFIN MTL 451 INERT 1/2D for collecting reactive dust at facilities with ATEX requirements. Contact our specialists to find out the current price and delivery terms, and to check the compatibility of the equipment with the materials used in your production.

Details
Suction Power (kPa)
22,5
Electrical
Power Requirements
115 / 230 V, 50 / 60 Hz
Rated Power (W)
1100
Safety
Running Noise, dB
74
Size & Weight
Net Weight (kg)
52
Dimensions Assembled (mm)
580 × 700 × 1470
Reviews
0/ 5
average product rating
0
0
0
0
0
There are no reviews for this product. Be the first to leave your review.

No questions about this product, be the first and ask your question.

Related Products